Although the floor glue board is good, it is inevitable that various problems will occur during use-the floor glue bulges and deforms, which directly affects the overall aesthetics of the floor, and even causes the floor to not be used normally.
1. The foundation ground is uneven
Uneven foundation ground will lead to uneven welding of the floor glue. Over a long period of time, the floor glue is easy to open welding, and it will also cause the floor glue to bulge.
2. The foundation ground itself is damp and not completely dry
When the ground is wet, the water vapor at the bottom of the floor will not evaporate in time, and it will accumulate for a long time, forming large water droplets or stagnant water, which will cause the board to be damp and cause deformation or bulging.
3. The self-leveling is not dry, uneven and dusted
If the self-leveling is not completely dry, the rubber floor will inevitably bulge in the future, and the ground needs to be polished to ensure the flatness of the ground after the self-leveling treatment. Glue the drum.
4. Incorrect selection of auxiliary materials
For different grounds, suitable auxiliary materials need to be selected for construction. For example, the cement floor needs to be constructed with double-sided tape to ensure a firmer construction.
5，The temperature is below 13℃
When the temperature is lower than 13℃ during construction, it will also cause the floor glue to bulge.
Post time: Oct-26-2021